6. MAINTENANCE
To maintain reading precision above the prescribed level, keep the Scanner Window clean. To clean the Top Window, use a soft cloth. Remove the Top Window as shown in the figure below, and wipe the Top Window softly using a dry soft cloth. When the Top Window is badly soiled, use a cloth after moistening it with water and wringing water from it. Then wipe the Top Window again using a dry cloth. Clean the Under Window in the same manner. Be careful not to damage the Under Window, since it is made of acrylic and easily damaged.
1) | 2) |
Top Window
Window Frame
Under Window
Coin etc.
<Removing the Window Frame> | <Removing the Top Window> |
3)
<Cleaning the Scanner Window>
•Reassemble the Top Window so that the window cut part will be placed on the convex part of the Top Window Holder.
- 6 -