Toshiba MR-3018 service manual Original exit/reverse motor drive section

3.1.4Original exit/reverse motor drive section

Gate solenoid

Reverse fapper

Exit/reverse motor

Exit Exit/reverse rollor

Reverse

Fig.3-4

When the data of the original have been scanned, the original is exited to the original exit tray by the exit/reverse roller driven by the exit motor (shown in a solid line in the figure).

In the duplex scanning mode, the gate solenoid is turned ON and the reverse flapper is lowered to switch the transport path to the reverse tray side when the scanning of one side of the original is com- pleted.

When the reverse flapper is lowered, the original is temporarily transported to the reverse tray, and then the exit motor rotates reversely to return the original to the transport path switched for reverse operation (shown in a dotted line in the figure).

The reversed original is aligned with the reverse registration roller, and then the other side of the origi- nal is scanned. When the scanning is completed, the original is exited to the original exit tray.

MR-3018 DESCRIPTION OF OPERATIONS June 2005 © TOSHIBA TEC

3 - 4