Toshiba L310 user manual Real Time Clock, Keyboard

Troubleshooting

■Reformatting the media

■Reinstalling an operating system from the recovery CD-ROM

The procedures above delete only the initial part of the data used for file management. This makes the file invisible to the operating system, but the data can still be read by specialized utilities. If you dispose of the PC, please delete all the data on its hard disk drive. Doing so prevents unauthorized use of such data. To ensure your data is not used for unauthorized purposes, you can:

■Physically destroy the hard disk drive

■Use a proven specialized utility to overwrite all data

■Take the hard disk drive to a professional deletion service

Real Time Clock

Problem	Procedure
The BIOS setting and	Charge in the RTC battery is exhausted or
system date/time are	getting low. You will need to set the date and time
lost.	in the BIOS setup screen using the following
	procedure
	1.	Press F2 key. BIOS setup will boot up.
	2.	Set the date in System Date.
	3.	Set the time in System Time.
	4.	Press F10 key. Confirmation message will
		appear.
	5.	Press Enter key. BIOS setup will terminate
		and the computer will be rebooted.

After configuring the time and date for the Real Time Clock battery, we recommend that you turn the power status of your computer to "ON" so that the Real Time Clock battery is charged.

Keyboard

Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 5, The Keyboard.

Problem	Procedure
Some letter keys	Check that the numeric keypad overlay is not
produce numbers	selected. Press Fn + F11 and try typing again.
Output to screen is	Make sure the software you are using is not
garbled	remapping the keyboard. Remapping involves
	reassigning the meaning of each key. Refer to
	your software’s documentation.
	If you are still unable to use the keyboard,
	consult your dealer.

User’s Manual 9-7