Toshiba L310 USB Sleep and Charge function, How to enable fingerprint Single Sign-On feature

Operating Basics

How to enable fingerprint Single Sign-On feature

It is necessary to first enroll your fingerprint with the TrueSuite Access Maganer application prior to enabling and configuring the fingerprint Single Sign-On feature. Check that the fingerprint is enrolled before configuring the settings.

1.Swipe your finger across the fingerprint sensor. Or enter Windows password and click Next.

2.Click settings.

3.The Administrator Settings screen is displayed. Place a checkmark in “Enable Pre-OS Fingerprint Authentication”.

4.Then, place a checkmark in “Enable Single Sign-On Fingerprint Authentication” and click OK.

The modified configuration for the fingerprint Single Sign-On feature becomes effective the next time the system is booted up.

Fingerprint utility limitations

TOSHIBA does not guarantee that the fingerprint utility technology will be completely secure or error-free. TOSHIBA does not guarantee that the fingerprint utility will accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the fingerprint software or utility.

USB Sleep and Charge function

Your computer can supply USB bus power (DC5V) to the USB port even when the power of the computer is turned OFF. “Power OFF” includes Sleep Mode, Hibernation Mode or shutdown state.

This function can only be used for ports that support the USB Sleep and Charge function (hereinafter called “compatible ports”).

Compatible ports are USB ports that have the ( ) symbol icon.

You can use the “USB Sleep and Charge function” to charge certain USB- compatible external devices such as mobile phones or portable digital music players.

However, the “USB Sleep and Charge function” may not work with certain external devices even if they are compliant with the USB specification. In those cases, turn the power of the computer ON to charge the device.

User’s Manual 4-9