Toshiba satellite p100 manual 18 CPU, Removing the CPU heat sink

Replacement Procedures

4.18 CPU

Removing the CPU heat sink

The following describes the procedure for removing the CPU heat sink (See Figure 4-27 ).

1.Disconnect the Heat sink cable from the connector CN20 on the system board

2.Remove the following screws securing the heat sink holder along 1 to 3.

• M2.5⋅4.0 BIND screw x3

NOTE: When removing the heat sink holder, be sure to remove the screws in the reverse order of the number marked on the holder.

3.Remove the CPU heat sink.

4

1

35

2

M2.5 x 4.0 BIND

CPU heat sink

CN20

Figure 4-27 Removing the CPU heat sink

Satellite P100 Maintenance Manual (960-Q02) 4-47