Siemens PC 870 manual Slits for vertical soft key labeling strips

Maintenance

4.3Replacing soft key labeling

(operating units with key-based front panels only)

The two horizontal and two vertical rows of soft keys of the operating units with key-based front panels can be assigned user-specific func- tions. You can use two printed labeling strips to identify the soft keys.

A4 foil sheets are available for you to prepare the strips for insertion.

Procedure:

1.Print the foil with a laser printer.

2.Cut the labeling strips along the preprinted lines.

3.Insert the strips through the slits provided on the rear side of the operating unit (see Figure 4-5).

	Slits for vertical soft key labeling strips
	Slits for horizontal soft key labeling strips
Fig. 4-5	Rear side of the operating unit with connections and slits for the soft key labeling strips

4-6	SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual
	Edition 07/01