Configuring Communication Connections
4.5.4Checking ISO-on-TCP Connection Properties
Overview Tab
The overview shows all the configured
You can adjust the width of the columns in the table.
For an example of this display, refer to Section 4.3.4 (the ISO transport connection).
Parameter
Description
Local ID | This is the connection ID of the |
| configuration; DWORD) |
Name (loc. | Entered connection name. This identifies the |
endpoint) |
|
|
|
CPU / | If you display all the ISO transport connections being operated in this station in the |
Applications | multiprocessor mode (with PC stations: multiple applications), the CPU/application that |
| is the endpoint of the particular connection is specified here. |
|
|
R/S or via CP | With |
| With PC stations: Display of the CP over which the connection is maintained. |
Partner | Specifies the remote IP address of the connection. |
address |
|
Local TSAP | Local Transport Service Access Point (8 characters default) |
Remote TSAP | Remote transport service access point (8 characters default). |
|
|
Mode | Displays the mode configured in the ”Options” tab. |
Status | Indicates the current configuration of the connection. |
| “Connections without assignment” are indicated by “No local CP/No remote CP” in the |
| status column and a “!” character at the end of the“Local ID” (for example: 0002 A000!). |
| Connections you are currently editing are also indicated by “!” at the end of the local ID. |
Connection Overview with Multiple CPUs in an S7 Station
If you operate more than one CPU in your S7 station, you can click the button to extend the overview to the connections on all CPUs.
118 | SIMATIC NET NCM S7 for Industrial Ethernet |