Toshiba e-STUDIO5520C, 6520c manual Key in the read values and specify the repeat count

Page 141

4 EDITING FUNCTIONS

Do not place any heavy objects (4 kg (9 lb.) or over) on the original glass and do not press on it with force.

Breaking the glass could injure you.

4 Read the following 4 values to specify the area using the left and top scales on the original glass.

X1: From the top left to the left edge of the selected area

X2: From the top left to the right edge of the selected area

Y1: From the top left to the upper edge of the selected area

Y2: From the top left to the lower edge of the selected area

Note that the marks of the original scale have a 2 mm (0.08") pitch.

5

Key in the read values and specify the repeat count.

1)

Press [X1], [X2], [Y1] and [Y2], and then key in the read value correspondingly.

 

2)

Change the number of times you repeat the image (repeat count) by pressing either [ 2] or [ 8].

 

3)

Press [OK].

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

yThe selected area will be copied from the top right corner in a vertical direction.

yIf the repeated image runs over the paper size, the part run over will not be copied.

6 Place the original again on the original glass with its face down.

Place with its bottom toward you. Match its top left corner against that of the original glass.

7 Selectpanel. other copy modes as required, and then press the [START] button on the control

Image Repeat 139

Page 140 Page 142
Image 141
Page 140 Page 142
Contents Copying Guide Page Preface Page Contents 103 101105 107142 Image Adjustment Function Combination Matrix 201146 147203 Basic Menu for the Copier Function Placing PaperBasic Menu for the Copier Function Storage button This is for the storage function Equipment status indication area „ Acceptable copy paper Placing Paper‰ Unacceptable copy paper ‰ Precautions for storing copy paper„ Placing paper in drawers Gap between the paper and the end guide B in the figure on Gap between the paper and the side guides a in the figure onTouch panel. When it is the same, press no To automatically detect the size of paper placed in a drawer When Did you change paper size and type? appears„ Registering paper size When paper size is set to be detected automaticallySelect the paper size on the touch panel „ Setting paper type ThicknessAttribute Placing Paper Select the paper type „ Placing paper in the Tandem Large Capacity FeederClearing the set paper type Do not touch the slide rail a in the figure on the rightPlace paper on the left tray Change the paper type as requiredDo not touch the slide rails a in the figure on the right Place paper on the trayPage Placing Originals Before Making CopiesMaking Copies Bypass CopyingBefore Making Copies „ Storage of color copies„ Forgery prevention function Placing Originals „ Acceptable originalsMaximum number of sheets for one scanning „ Placing originals on the original glass When you copy highly transparent originalsRaise the Radf Lower the Radf carefullyIts face down. Align it against the left rear corner „ Book-type originalsOriginal glass Open the desired page of the original and place it withWhen black streaks appear ‰ Continuous feed mode Align all the originalsFor long originals ‰ Single feed mode If there is another original, insert it in the same wayAfter all the originals are pulled in, press Finished Making Copies „ Basic copying procedureMake sure that paper is placed in the drawers Place the originalsMaking Copies ‰ Stopping and restarting copying „ Scanning the next original during copying Canceling jobs being scannedPress the Start button on the control panel Confirming auto jobs„ Interrupting copying and making other copies „ Proof copy Press the Start button on the control panel Changing the exit tray „ Selecting exit tray„ Bypass copying Bypass CopyingBypass Copying Press Paper Type Select the paper type and then press OK Paper type Icon About Back‰ Copying on other than the above standard sizes of paper Press Other under Copy Bypass Copying Press Custom Paper on the touch panel „ Bypass copying on non-standard size paperKey in the dimension ‰ Registering non-standard size in the memory Selecting Finishing Mode Before Using Copying FunctionsPaper Selection Duplex CopyingBefore Using Copying Functions „ Default settings„ Confirming the set functions Clearing all settings changed „ Clearing the set functions„ Restrictions on function combinations „ Automatic Paper Selection APS Paper SelectionPlace paper in the drawers „ Selecting desired paper manuallyPress Zoom on the touch panel „ Copying mixed-size originals in one operationPress Mixed Size Switching color modes Switching Color ModesWhen color originals are copied in black Example When black originals are copied in full colors ExamplePress Original Mode on the touch panel Setting Original ModesSelect the original mode Density Adjustment Adjusting automatically automatic density adjustmentAdjusting manually „ Automatic Magnification Selection AMS Enlargement and Reduction CopyingPlace paper in the drawers Press Zoom on the touch panel Automatic Magnification Selection AMSSelect the desired paper size and then press AMS Enlargement and Reduction Copying ‰ Registering paper sizes to Other size One-touch zoom buttons „ Specifying reproduction ratio manuallySelect the desired size Photo Zoom Select the desired copy paper size, and then press OK Select the original size‰ Setting photo originals in other sizes „ Finishing modes and optional finishing devices Selecting Finishing ModeFinisher Hole Punch Unit‰ Name of each part of the Finisher optional Using the tray holderMJ-1103 MJ-1104Sort mode Group mode „ Sort/Group modePlace paper in the drawers Place the originals Press Finishing on the touch panel„ Rotate sort mode Selecting Finishing Mode Place the originals Press Finishing on the touch panel „ Staple sort mode‰ Maximum number of sheets available for stapling Requirements for saddle stitching „ Magazine sort / Saddle stitchPlace paper in the drawers „ Hole punch mode Selecting Finishing Mode „ Manual staple mode Let go of the paper, and then press the stapling buttonMaximum number of sheets available for manual stapling Duplex Copying Place the originals Press 2-SIDED on the touch panel „ Making a 1-sided copy„ Making a 2-sided copy Select the desired modePress 2-SIDED on the touch panel Select the desired mode „ Making a 2-sided copy from a book-type original Select other copy modes as required Select the book copying typePlace the original on the original glass Performing Copy & File Press OK FTP „ Setting share folderNetWare IPX/SPX / NetWare TCP/IP SMBPage 134 Displaying Edit Menu Image ShiftDisplaying Edit Menu Image Shift „ Creating top/bottom margin or left/right marginPlace the originals Press Image Shift on the Edit menu Image Shift „ Creating bookbinding margin Press Book Adjust the width of the binding margin Place the originals Press Edge Erase on the Edit menu Edge EraseAdjust the width of the part to be erased Book Center Erase Press either 2 mm 0.08 or 50 mm Press OK Dual Is finished, open the next pages and place them ForceBreaking the glass could injure you 2IN1 / 4IN1 Place the originals Press 2IN1 / 4IN1 on the Edit menu Perform 2IN1 / 4IN1 setting Magazine sort mode Magazine sort & saddle stitch mode Magazine Sort ModeSelect the paper size Magazine sort & saddle stitch A3, A4-R, B4, LD, LG, LT-RMagazine Sort Mode Image Editing „ Trimming / MaskingPress Editing on the Edit menu Breaking the glass could injure you Key in the read values Place the originals Press Editing on the Edit menu „ Mirror image / Negative/positive reversalImage Editing Place the originals Press XY Zoom on the Edit menu XY ZoomXY Zoom Cover Sheet Place the paper for the cover sheetsPlace the normal paper in the drawers Place the originals Cover Sheet When they are placed on the original glass, follow steps 8 Sheet Insertion Place sheets for sheet insertionPlace the normal paper in the drawers Sheet Insertion Copying starts Time Stamp Select the direction and position of a page number NumberNumber Press JOB Build on the Edit menu Job BuildPlace the first stack of originals, and then select settings Press the Start button on the control panel Image Direction Press Image Direction on the Edit menuSided open to left portrait original 1-sided copy Image direction is now set Book Tablet ADF Sadf Place the originals on the Radf one sheet at a time Full Image Full Image Image Repeat Image RepeatKey in the read values and specify the repeat count Place the originals Press Omit Blank page on the Edit menu Omit BlankOmit blank page is now set Outside Erase Outside erase set No settingSet outside erase Page Image Adjustment Displaying Image Menu „ Color balance Ymck adjustment Using Image Adjustment FunctionsCanceling color balance adjustment Canceling RGB adjustment „ RGB adjustment„ One-touch adjustment Canceling one-touch adjustmentWhen Marker is selected Canceling background adjustment „ Background adjustment„ Sharpness Canceling sharpness adjustment„ Twin color copying ‰ Twin color selectablePress Twin Color Copy in the Image menu Press Second Color Select the desired color Press or of the color to obtain the desired color balance ‰ RED & Black Press RED & Black Adjust the color, press OKRange Adjustment „ Mono color copying Canceling mono color copyingPress HUE in the Image menu „ HueCanceling hue adjustment Adjust the hue„ Saturation Canceling saturation adjustmentRegistering Templates 167 Templates 164Recalling Templates 174 Changing Data 177 Deleting Groups or Templates 180„ Displaying template menu Templates„ Using Useful templates Templates with copying functionsTemplates with scanning functions Templates with e-Filing functions „ Registering templates into the public template group Registering TemplatesSet all the required functions Press Template on the touch panelPress Password To switch the menu Select a templateEnter the necessary information about the template „ Creating a new private group Enter the necessary information about the group Select a group„ Registering templates into a private group Register a template following steps 6 and 7 on Select the desired groupPublic template group Registering templates intoRecalling Templates Press the button for the desired template Message is displayed for approx seconds „ Changing private group data Changing DataTemplate menu, select the desired group Press the Function Clear button on the control panel„ Changing template data Enter the password as follows and then press OKTemplate group Select the desired templateDeleting Groups or Templates „ Deleting private groupsTemplate menu, select the desired private group Press Delete „ Deleting templates Press the button for the desired template Press Delete Page Confirming Copy Job Status 186 Confirming JOB Status„ Confirming jobs in progress or ones in waiting Confirming Copy Job Status‰ Deleting jobs Resuming the paused job ‰ Pausing jobs‰ Moving jobs „ Confirming copy job history Confirming Copy Job Status Press JOB Status on the touch panel Press the Supply tab „ Confirming drawersPress JOB Status on the touch panel Press the Toner tab „ Confirming amount of toner remainingPage Image Adjustment Function Combination Matrix 201 Continuous Copying Speed 196Copying Function Combination Matrix 199 „ Color copying Continuous Copying SpeedSTUDIO5520C STUDIO6520CSTUDIO6530C „ Black-and-white copyingSTUDIO6530C Copying Function Combination Matrix Copying Function Combination Matrix„ Combination matrix 2/2 „ Combination matrix 1/2 Image Adjustment Function Combination MatrixColor mode Black Numerics Index41, 52 174 Index FC-5520C/6520C/6530C OME080008B0 Multifunctional Digital Color Systems
Related manuals
Manual 288 pages 49.36 Kb

6520c, e-STUDIO5520C specifications

The Toshiba e-STUDIO5520c and e-STUDIO6520c are advanced color multifunction printers designed for businesses looking to enhance productivity and efficiency in their document handling. These models combine printing, copying, scanning, and faxing functionalities into a single device, making them an ideal solution for busy office environments.

One of the standout features of the e-STUDIO5520c and e-STUDIO6520c is their impressive printing speed. The e-STUDIO5520c is capable of printing up to 55 pages per minute, while the e-STUDIO6520c can reach speeds of up to 65 pages per minute. This high-speed performance ensures that large print jobs are completed quickly, allowing businesses to maintain workflow without unnecessary delays.

Both models also feature a high-quality color printing capability with a resolution of up to 1200 x 1200 dpi. This ensures that documents, presentations, and marketing materials are produced with crisp text and vibrant colors, helping to create a professional image for any organization.

Another key characteristic of these printers is their versatile paper handling options. They are equipped with multiple paper trays, allowing users to accommodate various paper sizes and types, including envelopes and heavy stock paper. An optional high-capacity feeder can be added to increase the maximum paper capacity to suit larger print volumes.

The Toshiba e-STUDIO5520c and e-STUDIO6520c also incorporate advanced scanning technologies. With the capability to scan at speeds of up to 160 images per minute, these models streamline document management processes. Features such as duplex scanning and optional OCR (Optical Character Recognition) ensure that scanned documents are easily searchable and can be converted into editable formats.

Security is paramount in today’s business environment, and these multifunction printers come equipped with robust security features to protect sensitive information. They support secure printing, user authentication, and encrypted data transfer, providing peace of mind for organizations that handle confidential materials.

In terms of user experience, both models feature an intuitive touchscreen interface, making navigation and operation straightforward. Additionally, they support mobile printing solutions, allowing users to print documents directly from their smartphones or tablets.

Overall, the Toshiba e-STUDIO5520c and e-STUDIO6520c multifunction printers are designed to meet the diverse needs of modern offices. With their high-speed printing, top-quality output, robust security measures, and user-friendly features, they present a comprehensive solution for businesses aiming to optimize their document workflows and productivity.
Top Page Image Contents