Toshiba GD-1210 Recording Paper Selection Algorithm and Printing Algorithm, Printing algorithm

2.2Recording Paper Selection Algorithm and Printing Algorithm

Before printing the received image, the preset settings are evaluated in the order of the following 1) and 2), and the printing is performed based on the result.

1)Recording paper selection algorithm

-Basically, the received image is printed on a sheet of paper of the same size as the original. However, if this size is not available, this algorithm determines on which size of recording paper the output should be made. (Actual Size Mode/Free Mode)

2)Printing algorithm

-Determines how the received image is to be printed. (Discard printing/Vertical reduction printing/ Regular size reduction printing/Split printing)

2.2.1Recording paper selection algorithm

It is possible to distinguish the size of each received image (A3(LD)/B4(LG)/A4(LT)/B5/A5). Basically, recording paper of the same size as the original is used for printing. If recording paper of the size is not available, this algorithm selects paper of another size according to the setting in the Setting Mode.

1)Actual Size Mode (13-517: 0)

-Printing is performed when regular size reduction is not applied to the received image. In this mode, an A4/LT received image is printed on a B4 recording paper.

2)Free Mode (13-517: 1)

-Printing is performed on any available recording paper.

2.2.2Printing algorithm

Recording paper has its effective printing area. Even if the size of the original paper and the recording paper are the same, the length of the original is normally longer.

This means that the received image would be divided onto two sheets. To prevent this, the printing algorithm works as described in the following pages.

GD-1210/1250/1270/1160/1260	© 2006 - 2011 TOSHIBA TEC CORPORATION All rights reserved
LSU-RELATED FUNCTIONS

2 - 2