Back Panel not pictured | Kustom Arrow 16R manual

1.) CD/Tape Input - This 1/4" 3-conductor jack will allow you to plug in a CD player, tape or any other source to practice along with. It sums the left and right signals into a mono signal and passes it through to the amplifier section. To control the volume of the source, adjust the output volume of the device. We suggest you turn the volume all the way down then plug in and adjust the volume according to your taste.

2.) Guitar Input - This is a 1/4" 2-conductor input jack for plugging in your instrument. It is intended for guitars but will accept other instruments as well.

3.) Lead Gain - Adjust this clockwise to increase the amount of distortion you add to the overdrive signal. Used in the lower ranges of the control you will get a less distorted sound. As you increase the gain, you add tremendous amounts of distortion to the signal for a harder edged "crunch" tone.

4.) Channel Select Switch - This switch selects which preamp you are using. It will switch between the Clean and Lead channels.

5.) Lead Volume - This control is the output volume control for the Lead Channel. It follows the same tone circuit as the other channel. Its gain structure is determined by the lead gain control but this serves as the overall master volume for this channel.

6.) Clean Level - This is the volume control for the clean channel. Its gain structure is preset for maximum signal before distortion and determines the output level of the amp.

7.) Bass - This control is the bass control. It is passive and set to shelve frequencies at 100 Hz. This will affect the low frequency signals. Turning it fully clockwise, the signal is left alone. Turning it counterclockwise, the lows will be rolled off.

8.) Mid - This control is the midrange control. It is passive and set to shelve frequencies at 700 Hz. This will

affect the middle frequency signals. Turning it counterclockwise, your signal will "hollow out" the mid frequency, which is popular in today's music.

9.) High - This control is the high control. It is passive and set to shelve frequencies at 4KHz. This will effect the high frequency signals. Turning it fully clockwise, the signal is left alone. Turning it counterclockwise, the highs will be rolled off.

10.) Reverb Level - (only on the Arrow16R). This control adds the spring reverb and mixes it into the main signal buss. Reverberation lets the notes "hang in the air" longer, extending the sound.

11.) Headphone Jack - This is a 1/4" 3-conductor jack for plugging headphones. It will sum the signal and put the sound in both ears, thereby creating a pseudo-stereo sound. Volume will be determined by the volume control on the channel you are on. It will disconnect the internal speaker when plugged into. This will allow quiet practicing.

12.) Jewel Light - This jewel light lets you know that the amplifier is on.

13.) Power - This switch turns on and off the AC power to the amp.

Back Panel (not pictured) -

Speaker Out - This is a 2-conductor 1/4" speaker output jack. This will disconnect the internal speaker and allow an external speaker cabinet to be employed. Rating is 8 ohms.

Arrow 16, Arrow 16R specifications

The Kustom Arrow 16R and Arrow 16 represent a significant leap in portable amplification technology, designed to provide musicians and performers with robust sound solutions. These models are tailored for both professional and amateur users seeking high-quality audio output in various environments.

The Arrow 16R is a powerful and versatile amplifier that features a 16-channel input system, allowing users to connect multiple instruments and microphones simultaneously. This versatile architecture makes it ideal for band performances, rehearsals, and studio sessions. Each channel is equipped with individual gain controls, allowing precise adjustments to ensure optimal sound quality.

The Arrow 16, while slightly less complex than its 16R counterpart, retains many of the same core features and offers a streamlined experience for users who require fewer channels. It comes with eight channels, catering well to solo artists and small groups without sacrificing sound clarity.

Both models showcase advanced digital signal processing (DSP) technology, which enhances audio quality and provides various sound effects and equalization options. Musicians can access reverb, delay, and modulation effects directly from the mixer, giving them the flexibility to shape their sound live without additional external processors.

One of the standout characteristics of the Kustom Arrow series is its built-in Bluetooth capability. This feature allows users to stream music directly from their smartphones or tablets, making it convenient for backing tracks during performances or casual listening sessions.

Portability is another key aspect of the Kustom Arrow line. With their lightweight design and sturdy construction, both models are easy to transport, making them ideal for gigs or impromptu jam sessions. In addition, they feature integrated handles for effortless carrying.

Furthermore, the Arrow 16R and Arrow 16 boast high-quality built-in speakers, delivering rich sound across a wide frequency range. This ensures that vocals and instruments are heard clearly, even in larger venues. The amplifiers also offer microphone and line inputs, making them suitable for a variety of applications, from karaoke nights to public speeches.

In summary, the Kustom Arrow 16R and Arrow 16 are sophisticated audio solutions that merge advanced technology, portability, and user-friendly features. Whether for professional gigs or casual gatherings, these amplifiers are designed to meet the diverse needs of musicians and audio enthusiasts.