Control panel, Programme selector, Door Button | Miele T 4262 C

Control panel

a Programme selector

The programme selector can be turned clockwise or anti-clockwise.

b Programme sequence and check lamps

c Start button

Press the Start button to start a programme.

The Start indicator lamp will flash as soon as a programme can be started. It lights up constantly once the programme has started.

d I-On/0-Off button

To switch the machine on or off / to interrupt a programme.

The Anti-crease/Finish lamp will light up as confirmation that the machine has been switched on.

e Door Button

To open the door / to cancel a programme.

Pressing this button will open the door even when the machine is switched off at the mains.

If the machine is switched on at the mains and the door is opened the drum lighting will come on. It will go out a few minutes later to save energy.

PC indicator light

The indicator light marked PC is used by Miele Service technicians as an optical interface.

9

Image 9

Miele T 4262 C Control panel, Programme selector, Programme sequence and check lamps, Door Button, PC indicator light

Contents

Operating instructions For condenser tumble dryer T 4262 C Disposal of the packing material Caring for the environmentDisposal of your old appliance Energy saving tips Contents Consumption data Technical data Correct use Technical safetyPage Operation Safety with children Using accessoriesDisposal of your old machine Control panel PC indicator lightProgramme selector Programme sequence and check lamps Tips on drying Care symbols Brief instructions How to dry correctlySort the laundry Turn on the tumble dryer Low temperature Select a programmeStart the programme Changing the programme sequence Programme chart Timed drying AutomaticWarm air Cool air Emptying the condensed water container Cleaning and care Cleaning them whilst dry Cleaning the fluff filters Cleaning them with water Cleaning the tumble dryer Removing the condenser unit Cleaning the condenser unit Checking the condenser unit Replacing the condenser unit General problems Problem solving guide Up of fluff Problem Possible cause Remedy There is a buildLaundry is Not sufficiently Problem Possible cause Remedy Drying process Even switches offGoes on too long or Check and fault indicator lamps Stopped, Problem Possible cause Remedy Programme hasHas come on Sequence display Changing the lamp Appliance guarantee After sales serviceOptional accessories Repairs Front view Installation Installation site Transporting the machine to its installation siteReplacing the lid Levelling the machine Before moving the machine again e.g. when moving houseRoom in which the dryer is located Washer dryer stack External condensed water outlet Setting up the drain hose Connection to a sink drain outlet Non-rewireable plugs BS Electrical connectionElectrical connection U.K Smoothing Consumption data Technical data Programmable functions for changing standard settings To check Programmable functions Programmable functions Activating and deactivating the buzzer Buzzer is deactivatedBuzzer is activated Cooling down time will be five miinutes longer Extending the cooling down timeCooling down time will be ten minutes longer Cooling down time is not extended Standard drying level is Normal+ Standard drying level is Hand iron Alteration rights reserved/0505