Programmable functions
Activating and deactivating the buzzer
A buzzer sounds (at intervals for a maximum of 1 hr) to let you know the programme has finished.
The machine is delivered with the buzzer activated but you can deactivate it if wished.
The buzzer will still sound if there is a fault, even if it has been deactivated.
Follow steps A to G to programme and store in memory.
Before you begin, first ensure that:
–The tumble dryer is switched off.
–The door is closed.
–The programme selector is at Finish.
APress the Start button and keep it pressed in whilst carrying out steps
BSwitch the dryer on with the
CWait until the Start indicator lamp comes on . . .
D. . . and then release the Start button.
ETurn the programme selector to the Cottons Hand iron position.
FPressing the Start button switches between activating and deactivating the buzzer.
–If the Drying indicator lamp is not flashing:
the buzzer is deactivated
–If the Drying indicator lamp is flashing:
the buzzer is activated
GSwitch the machine off with the
The setting you have selected is now stored in memory. You can change it again at any time.
To check:
^Make sure the dryer is switched off, the door is closed and the programme selector is at Finish and then carry out steps A to E.
The Drying indicator lamp will show you if the buzzer is activated.
^Switch off the dryer. The check is complete.
40
