Programmable functions
Changing the standard drying level in the Minimum iron - Normal programme
The drying level for this programme is set at a standard level.
You have the option of changing this to an increased drying level.
The machine is delivered with the drying level set at Normal
You can change this to Normal+ (drier than the standard drying level).
Important: the "Normal+" drying level will work in addition to the "Altering the residual moisture level in the Minimum iron programmes" programmable function, if you have already set this.
Follow steps A to G to programme and store in memory.
Before you begin, first ensure that:
–The tumble dryer is switched off.
–The door is closed.
–The programme selector is at Finish.
APress the Start button and keep it pressed in whilst carrying out steps
BSwitch the dryer on with the
CWait until the Start indicator lamp comes on . . .
D. . . and then release the Start button.
ETurn the programme selector to Minimum iron - Normal.
FPressing the Start button alters the drying level.
–If the Drying indicator lamp is flashing:
the standard drying level is Normal+
–If the Drying indicator lamp is not flashing, the increased drying level is not activated and the drying level will remain on the standard setting
(
).
GSwitch the machine off with the
The setting you have selected is now stored in memory. You can change it again at any time.
To check:
^Make sure the dryer is switched off, the door is closed and the programme selector is at Finish and then carry out steps A to E.
The Drying indicator lamp will show you if the Normal+ drying level has been set.
^Switch off the dryer. The check is complete.
42
