How to dry correctly

F Remove the laundry

^Press the Door button.

^Open the door.

^Remove the laundry.

Make sure that the drum is empty. If items are left in the dryer, they could be damaged by overdrying when the dryer is next used.

^Switch the dryer off by pressing the l-On/0-Offbutton.

^Clean the fluff filters.

^Close the door.

^Empty the condensed water container (where there is no external drainage of the water).

^The condenser unit should be checked and cleaned on a regular basis.

Changing the programme sequence

Changing a programme while it is running

As long as the cooling down phase or the anti-crease phase has not been reached, it is possible to change a programme after it has started by turning the programme selector to a different programme position.

To interrupt a programme

^Switch the machine off with the I-On/0-Offbutton.

To continue drying:

^Switch the dryer on with the I-On/0-Offbutton.

The programme will continue (only with the Cottons, Minimum iron and Auto- matic programmes).

Other programmes:

^Press the Start button.

To cancel a programme

^Turn the programme selector to Finish or open the door.

Adding or removing laundry after a programme has started

^Press the Door button.

^Open the door.

,Do not touch the back of the drum when adding or removing items. The drum could be very hot - danger of burning.

^Add or remove items.

^Close the door.

^Press the Start button.

13

Page 13
Image 13
Miele T 4262 C operating instructions Changing the programme sequence