Toshiba user manual Using the DVD Rewriteable Drive SD-R6012, Removing Media, Usage Guidelines

Page 6

USING THE DVD Rewriteable Drive – SD-R6012

Drive Operation

Inserting Media

To insert media perform the following steps:

1.Figure 1.Inserting Disc

1.Open the drive's loading tray by pressing the Eject Button and pulling out the tray.

2.Place media disc into drive's loading tray, and lightly press down on the inner portion of the disc.

3.Gently close the disc tray.

Removing Media

To remove media disc from the drive, perform the following steps:

1.Open the loading tray by pressing the Eject Button, and pulling tray out.

2.Grasp disc by it's outer edge, and lift out of loading tray.

3.Gently close the loading tray.

Usage Guidelines

Keep the disc tray closed when not using the DVD Rewriteable drive

Do not press down on the disc tray when opening or closing it.

Do not place objects on the disc tray

Never use a damaged, broken, or deformed disc

Do not press the Eject button while the drive is accessing a disc

Emergency Ejection

CAUTION: The following procedure is intended only as a last resort when pressing the eject button fails to open the Loading Tray.

4

Image 6
Contents DVD Rewriteable Mobile Drive Contents General Features Introduction SD-R6012Types of Disc Formats Supported Write Types of Disc Formats Supported Read DVDFront Panel Setup SD-R6012 Installation NotesSoftware Driver Usage Guidelines Using the DVD Rewriteable Drive SD-R6012Removing Media Emergency EjectionCleaning Media Handling MediaTroubleshooting SD-R6012 SolutionSpecifications -SD-R6012 CD-DA, CD+EG, CD-MIDI, CD-TEXT, CD-ROM, CD-ROM XA, CD-IDVD-ROM Performance Reliability PowerConnectors EnvironmentalRegulatory Drive Connectors -SD-R6012