Toshiba SD-R6012 user manual Handling Media, Cleaning Media

1.Turn computer power OFF by properly shutting down system.

2.Insert a solid bar (i.e. large paper clip) into Emergency Eject hole and push in as shown in the picture below.

3.Loading tray will open/eject.

Figure 2.Using Emergency Eject

Handling Media

CD/DVD media is sensitive to dust and fingerprints. Carefully handle media by its edges only.

Cleaning Media

Try to avoid touching the read area (underside) of the disc as dirt and smears will degrade the disc accessing speed.

If the disc becomes dirty wipe it with a damp soft cloth. Avoid cleaning in a circular motion, but rather from the inner side outward.

NOTE: High-speed drives spin the disc at a high rotational speed. If a disc has printing on only half of the disc, or if there is a slight imbalance in the disc, the imbalance is greatly magnified by the high speed, causing the drive to vibrate or produce a fan-like noise. These effects are inherent in the high-speed technology and do not indicate a problem with the drive.

5