Toshiba SD-R5002 user manual Usage Guidelines, Emergency Ejection, Handling Media, Cleaning Media

Page 11

Usage Guidelines

Keep the disc tray closed when not using the DVD Rewriteable Drive.

Do not press down on the disc tray when opening or closing it.

Do not place objects on the disc tray.

Never use a damaged, broken, or deformed disc.

Do not press the Open/Close button while the drive is playing a DVD movie or accessing a disc. To stop a DVD movie, click Stop button in the DVD player application program.

NOTE: High-speed drives spin the disc at a high rotational speed. If a disc has printing on only half of the disc, or if there is a slight imbalance in the disc, the imbalance is greatly magnified by the high speed, causing the drive to vibrate or produce a fan-like noise. These effects are inherent in the high-speed technology and do not indicate a problem with the drive.

Emergency Ejection

CAUTION: The following procedure is intended only as a last resort when pressing the eject button fails to open the Loading Tray

1.Turn computer power OFF by properly shutting down system.

2.Insert a solid bar (i.e. large paper clip) into Emergency Eject hole and push in until loading tray opens. Pull tray out.

Figure 3.Using Emergency Eject

Handling Media

DVD media is sensitive to dust and fingerprints. Carefully handle media by its edges only. If a DVD movie skips or hangs during playback, clean the media. Most DVD video playback issues are media- related and can be remedied by proper handling and care of media.

Cleaning Media

Try to avoid touching the read area (underside) of the disc as dirt and smears will degrade the disc accessing speed.

If the disc becomes dirty wipe it with a damp soft cloth. Avoid cleaning in a circular motion, but rather from the inner side outward.

.

9

Image 11
Contents DVD Rewriteable Drive Contents Types of Disc Formats Supported Read Introduction SD-R5002Types of Disc Formats Supported Write System Requirements Front Panel Loading Tray Busy LightEject Button Emergency Eject Hole Jumper Settings Setup SD-R5002Placing DVD Rewriteable Drive inside your Computer Connecting CablesCompleting Installation Installing Power CablePage Inserting a Disc Vertically Drive Operation Inserting a Disc HorizontallyMedia Recommendations Removing a DiscSoftware Handling Media Cleaning MediaUsage Guidelines Emergency EjectionSolution Troubleshooting SD-R5002General Specifications -SD-R5002CD-ROM, CD-R CD-RW PerformanceEnvironmental PowerConnectors ReliabilityRegulatory Audio Drive Connectors -SD-R5002Connector Mode SelectInterface Pin Assignments
Related manuals
Manual 18 pages 23.76 Kb