Toshiba SD-R1312 Front Panel Loading Tray Busy Light, Eject Button Emergency Eject Hole

Page 4

Front Panel

Loading

Tray

Busy Light

LED

Eject

Button

Emergency Eject Hole

Figure 1.SD-R1312 DVD Writeable Drive Front Panel

Load disc using tray.

The LED lights green or amber when the drive is operating (LED is amber when drive is writing.)

The Eject button is used to open the disc tray so you can install or remove a disc.

The emergency eject hole is to be used only when the Loading Tray will not open when Eject button is pressed.

Image 4

Contents CD-RW/DVD-ROM Combo Drive Contents Types of Disc Formats Supported Write Introduction SD-R1312Types of Disc Formats Supported Read Front Panel Loading Tray Busy Light Eject Button Emergency Eject HoleSetup SD-R1312 Jumper SettingsConnecting Cables Placing Combo Drive inside your ComputerInstalling Audio Cable Completing InstallationDrive Operation Inserting a Disc Horizontally Inserting a Disc VerticallySoftware Removing a DiscUsage Guidelines Emergency Ejection Cleaning MediaHandling Media Troubleshooting SD-R1312 SolutionSpecifications SD-R1312 PerformanceReliability EnvironmentalPower ConnectorsPhysical RegulatoryDrive Connectors SD-R1312 Interface Pin Assignments