Toshiba SD-R1002 user manual Power, Physical, Connectors, Regulatory

Page 14

Power
DC Voltage and Current Requirements	5V, 12V ±5%
Physical
Height	5.75" (146mm)
Width	1.63" (41.5mm)
Depth	7.60" (193mm)
Weight	2.16lbs (0.98kg)

Connectors
DC input	4-pin Power Supply Connector
ATAPI Interface Connector	40 Pin I/F ATAPI Standard
Audio Connectors	4-pin and 2-pin connector (use matching
	housing, Part No. 70066, made by Molex
	Corp, or equivalent)
Regulatory

The SD-R1002 Combo drive has been certified by the following regulatory agencies:

•UL 1950

•CSA C22.2 No. 950

•TUV (EN60950I)

•CE standard

•DHHS 21 CFR Sub-Chapter J

•FDA CFR21, EN60825

Image 14

Contents CD-RW/DVD-ROM Combo Drive Contents Types of Disc Formats Supported Read Introduction SD-R1002Types of Disc Formats Supported Write LEDs Front PanelLoading Tray Load/Unload ButtonSetup SD-R1002 Jumper SettingsConnecting Cables Placing Combo Drive inside your ComputerInstalling Audio Cable Completing InstallationDrive Operation Inserting a Disc Horizontally Inserting a Disc VerticallyUsage Guidelines Removing a DiscSoftware Handling Media Cleaning MediaEmergency Ejection Troubleshooting SD-R1002 SolutionSpecifications SD-R1002 PerformanceReliability EnvironmentalPhysical PowerConnectors RegulatoryDrive Connectors SD-R1002 Interface Pin Assignments