Toshiba SD-M1912 Drive Operation Inserting a Disc Horizontally, Inserting a Disc Vertically

Page 8

USING THE DVD DVD-ROM Drive – SD-M1912

Drive Operation

Inserting a Disc - Horizontally

To insert a disc into a drive that is mounted horizontally, perform the following steps:

Figure 1.Inserting Disc

1.Open the drive's Loading tray by pressing the Eject Button.

2.Place disc into drive's Loading tray

3.Press Eject button again or gently push on the open disc tray. Tray will automatically close.

Inserting a Disc - Vertically

To insert a disc in a drive that is mounted vertically, perform the following steps:

1.Locate sliding disc holders (4 locations) on drive's Loading Tray.

2.Position the disc behind the disc holders

3.Close the drive by gently pushing in the tray or pressing the eject button.

Figure 2.Inserting Disc Vertically

6

Image 8
Contents DVD-ROM Drive Contents Drive Speed Types of Disc Formats SupportedEject Button Busy Indicator Emergency Eject Hole Front PanelSetup SD-M1912 DVD-ROM Jumper SettingsConnecting Cables Placing DVD-ROM Drive inside your ComputerInstalling Audio Cable Completing InstallationDrive Operation Inserting a Disc Horizontally Inserting a Disc VerticallyEmergency Ejection Removing a DiscUsage Guidelines Cleaning Media Handling MediaTroubleshooting SD-M1912 SolutionSpecifications -SD-M1912 GeneralPerformance CAV ZclvPower AudioEnvironmental PhysicalRegulatory Connectors Drive Connectors -SD-M1912Connector Interface Pin Assignments
Related manuals
Manual 17 pages 1.58 Kb