Toshiba P32LS1 How to install the monitor on the wall, Remove the stand of the LCD monitor

Page 25

How to install the monitor on the wall

1.Remove the stand of the LCD monitor

To avoid damage, spread blanket on the table to put the LCD monitor on.

To remove the stand of the LCD monitor, put the LCD monitor on the edge of the table, and remove the screws on the stand.

Described below is one example of how to install the unit on the wall. The wall hanging accessory will need to be manufactured according to the installation, so consult your dealer before the installation work.

2.Wall hanging accessory

Wall hanging accessory is available at the shop.

∗: In the package, the bracket and the frame of wall hanging accessory are assembled. Please separate the bracket and the frame at first. After the bracket is fixed on the wall, fix the frame on the LCD monitor.

3. Remove the frame from the bracket.

Hold the lower part of the frame and raise it up to remove from the bracket.

Frame

Bracket

4.Fix the bracket on the wall

Fix the bracket on the wall firmly with anchors or screws (not supplied).

Make sure anchors or screws are stable.

(Choose appropriate anchors or screws depending on the structure and material of the wall.)

Refer to the chart on page 24 to check the condition of the wall, and choose the safe and appropriate way for installation.

The wall (Bracket)

25

Image 25
Contents 23566558 LCD MonitorContents Malfunction or Trouble Safety InstructionsInstallation Use Insert the power plug fully into a 100∼240 V AC outletCleaning Follow these precautions for the power cord and plugTake measures to prevent the unit from falling down Do not climb or stand on the unit Remove the power plug before cleaning On disposal or handing over to a new owner On usageExemptions Features Front Names and Functions of Controls UnitSide Controls Back Infrared Emittor Names and Functions of Controls Remote controlRemove the battery cover, and insert batteries Battery installationEffective range Please check all are supplied Supplied accessoriesYou can select Video input from 4 terminals below ConnectionYou can select RGB input from 2 terminals below ConnectionVIDEO-1 has priority Output follows RGB AnalogAbout external speakers Connecting external speakersTo connect speakers Back sideBack Connecting the power cordExample To connect equipmentsVIDEO-1 Video Audio Video OUT Audio OUT Video and Audio connection exampleRGB RGB Audio To a service technician InstallationWall hanging accessory How to install the monitor on the wallRemove the stand of the LCD monitor Remove the frame from the bracketWire before hanging on the wall Using supplied screws, fix the frame on the LCD monitorMount the LCD monitor on the bracket How to install the LCD monitor to the ceiling How to install the LCD monitor on the floorSpecifications DimensionBack view A-angle Unit mmMain power switch Power on/offPower button on the Remote control Function of each button Menu FunctionPC Auto Setup Writing Exit Reset Menu setting chartTerms of functions Menu display chart YUV Connection Control by ComputerTransfer To connect in seriesFormat for Rgbdvi input signal Timing Input signalFor inquiries and repair Guide to Simple Problem SolvingPage About trademarks Annex