Toshiba 27WL46, 30WL46 Teletext, Panel Lock, PIP Usage Picture in Picture Feature, PIP Menu

ingilizce-2.FH11 6/7/05 12:14 PM Page 3

If any of the Timers is activated, the Green coloured light on the front side

will flash.

Please note: If you turn your television off from the main power supply switch then the sleep timer modes selected will be reset

and cancelled.

In Timer Mode: Use the right/left ( – / + ) buttons to select the program you want the TV to open when switching on.

Feature

In the MENU select Feature and press “OK” or () button . The Feature menu will be on screen.

Teletext

Select the teletext bar using the “OK” or down button in the setup menu. To right ( + ) button; If you choose Automatic; Fastext or Toptext (option) features can be determined for the channels with txt broadcasting. When list is selected, if the current channel does not broadcast Fastext or Toptext, you can store the teletext page numbers you want with the colour buttons or () and () buttons in the section there are 4 different colour buttons when you select teletext. While in the other pages of teletext, you can directly access this page you selected by pressing the colour button linked to them.

Panel Lock

If you switch this feature On, the button on the TV will not work when the TV is in Stand-by mode and screen will show a Panel Lock warning. In addition if the Panel Lock is On, the TV will not switch

on with the () and () buttons from stand-by mode.

Back Lighting: Using this feature you can increase or decrease the panel light.

PIP Usage (Picture in Picture) Feature

1.Press the PIP button on your remote

control.

2.A picture will open in main picture and will position itself in the lower screen.

3.If you press the PIP button again,

you will enter the PAP mode in which the main picture and the PIP picture will be shown in equal size.

4.If you press the PIP button the third time, the window will close and you will have exited this mode.

Note: If you want to exit the PIP mode at any time press the EXIT button.

	FEATURE
Teletext	List
Panel lock	Off
Back light
Back	Watch TV

PIP Menu

In the Features menu select PIP and press the OK button or the right/left ( – /+ ) buttons. The screen will show the PIP menu.

Note: This menu is only available in the features menu if the PIP is active.

PIP

Picture Format

PIP Size

PIP Position

Back Watch TV

Picture Format

To change the PIP Picture Format select this feature and press the right/left ( – /+ ) buttons. PIP window can be watched in the 4:3 or 16:9 format.

ENGLISH -19-