Toshiba 27WL46, 30WL46 manual Introduction, Transition to the PC mode, PC Input Setting

ingilizce-2.FH11 6/7/05 12:14 PM Page 5

Introduction

Because your 27” - 30” LCD-TV equipment is provided with VGA inputs, it may be used as a PC monitor as well. (Plug&Play)

Transition to the PC mode

To change your LCD-TV into monitor (PC) mode you have to press 6 times

the ”“ button on the remote control or press the OK button to select the PC choice in the line-up menu on screen and press OK to access it directly. To change back from the PC mode to the TV mode use the EXIT button on the remote control.

PC Input Setting

While in PC mode, use the down () button in the Setup menu to select the PC Input Setting and press “OK” or left/right ( – / + ) .The PC Input Setting menu will be on screen. In this menu

you can make the desired changes with Left- right, Up-down motion ( – / + ) ( /) buttons on your remote control.

H.Position: Horizontal position setting.

V.Position: Vertical position setting.

Phase: ADC’s phase setting.

Automatic configuration: The most suitable geometric settings in accordance to the entry mode is configured by this function. For this application, choose the AUTOMATIC CONFIGURATION option and press the OK button.

PC Input Setup

Hor. Position

Ver. Position

Phase

Auto Position

BackWatchTV

ENGLISH -21-