TOSHIBA AT300
1.Plug the Micro USB connector of a USB cable into the Micro USB port on this tablet.
Figure 4-2 Connecting an USB cable
1
2
1. Micro USB port | 2. Micro USB connector |
2.Plug the other end of the USB cable into the USB port on the computer.
Depending on your settings, your tablet will be recognized as a removable MTP (Media Transfer Protocol) device or PTP (Picture Transfer Protocol) device allowing you to access its contents from a computer.
If your computer does not support MTP, try using PTP for connection.
To remove this tablet from a computer:
1.Make sure all file operations are finished.
2.Unplug the tablet from your computer.
Make sure the connector is properly aligned with the socket. Do not try to force the connection, doing so can damage the connecting pins.
If USB tethering is turned on, it must be turned off before sharing or transferring files.
Factory Reset
The tablet provides you with the function to reset it. Before executing the reset, you need to backup the system settings, application settings, user installed applications and data in the internal storage.
To perform the factory data reset, please follow the steps below:
1.Tap All Apps
2.The factory data reset will be done.
Please note that the following data will be erased:
System settings and application settings
User installed applications
Internal storage files, such as music or photos
User's Manual |