Toshiba AT300 user manual Using the tablet for the first time, Connecting the AC adaptor

TOSHIBA AT300

Using the tablet for the first time

This section provides basic information about how to start using your tablet. It covers below steps followed by the details.

Connecting the AC adaptor

Turning on the power

Initial Setup Turning off the power

Use a virus-check program and make sure it is updated regularly.

Never format storage media without checking its content - formatting destroys all stored data.

It is a good idea to periodically backup internal storage of the tablet to an external media. General storage media is not durable or stable over long periods of time and under certain conditions may result in data loss.

Connecting the AC adaptor

When battery power becomes low, you must charge it.

Use only the tablet connected to an AC power source or TOSHIBA Tablet Dock to charge the battery. Never attempt to charge the battery with any other charger.

The AC adaptor can automatically adjust to any voltage ranging from 100 to 240 volt and to a frequency of either 50 or 60 hertz, enabling you to use this product in almost any country/region. The adaptor converts AC power to DC power and reduces the voltage supplied to this tablet.

Figure 3-2 The AC adaptor & power cable

3

4

1. AC adaptor

3. Power connector

	2-pin
2
1	3-pin

2.Power cable

4.USB connector

Depending on the model, either a 2-pin or 3-pin AC adaptor will be bundled with the tablet.

User's Manual 3-7