Moxa Technologies A51, A60 manual Ppendix B

Page 49

A ppendix B

Troubleshooting

Q1. Failure of data transmission.

Solutions:

Check that the RS-232 link is proper.

Q2. Data loss or error.

Solution:

1.Check that the data rate, data format are the same for both devices.

2.Surge occurs during the data transferring. Error detection and recovery should be taken in applications.

Q3. How do I do self-test on A50?

Solution:

Refer to Chapter 2.3, Self Test.

Image 49
Contents A50/A51/A60 A50/A51 A60 Copyright Notice Moxa Internet Services Table of Contents Part II A60 RS-232 Surge Protection Page Overview IntroductionIntroduction Features and SpecificationsSpecifications A50/A51 with Mounting Kit Package Check List Introduction Switch Function Description Installation ProcedureSwitch settings table of SW1 and SW2 is as follows LED IndicatorsRS-422/RS-485 Pinouts A50/A51 RJ-45 Jack Terminal Block Connector Pinouts Signals Chapter Operation Point-to-point Wire Full DuplexWire Half Duplex Multidrop SW1 DTE Simplex/Transmit, Receive A50/A51A50/A51 Self Test Operation Appendix a RS-232 Pinouts & Cable Wiring Appendix a RS-232 Pinouts and Cable Wiring Appendix a RJ-45 Connector DB-25 Female P e n dxi B Appendix B Impedance Matching and Termination Resistors Appendix C Troubleshooting Appendix C Troubleshooting Chapter Introduction Features A60 with Mounting Kit ~32~ Installation TxD indicator signal from local port RxD indicator signal from remote port ~36~ Ppendix a Appendix a ∙ RS-232 Pinouts and Cable Wiring ∙ ~40~ Ppendix B