Dell T3500 specifications Removing the Memory Card Reader, Replacing the Memory Card Reader

Page 45

Floppy Drive

Dell Precision™ T3500 Service Manual

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

Removing the Memory Card Reader

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove the computer cover.

3.Remove the front bezel.

4.Remove the drives bezel.

5.Disconnect the power and data cables from the back of the memory card reader.

6.Push the sliding-plate lever down to release the memory card reader.

7.Remove memory card reader from the computer.

Replacing the Memory Card Reader

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove the computer cover.

3.Remove the front bezel.

4.Remove the drives bezel.

5.Connect the power and data cables from the back of the memory card reader.

6.Push the sliding-plate lever down to secure the memory card reader in the computer.

7.Place the floppy drive in the computer.

Image 45
Contents Page Nvram Reset Jumper Password Enable JumperSystem Board Schematic About Your System BoardLpcdebug Boot Menu System SetupEntering System Setup System Setup Navigation KeystrokesPage Diagnostics Dell DiagnosticsOption Function Diagnostic LED Patterns Power Button Light CodesTab Function LED pattern LED Description State descriptionSystem Beep Codes Description Beep CodesAdding and Replacing Parts Specifications Controls and Lights ConnectorsPower PhysicalEnvironmental Removing the Battery BatteryPage Removing the Cover CoverPage Removing Drives Bezel Drives BezelPage Page Removing the Front Bezel Front BezelRemove the bezel from the front of the computer Page Removing the Front Fan Assembly Front Fan AssemblyRemove the memory module shroud Page Page Floppy Drive Removing the Floppy DriveReplacing the Floppy Drive Removing the Hard Drives Hard DrivesPage Page Page Removing the Hard Drive Tray Hard Drive TrayPage Page Chassis Intrusion Switch Removing the Chassis Intrusion SwitchReplacing the Chassis Intrusion Switch Data Cable Removing the I/O Data CableReplacing the I/O Data Cable Removing the I/O Panel PanelPage Remove the I/O panel from the computer Page 1333MHz 1066MHz Channel Ranks Mode Supported Memory ConfigurationsMemory Removing and Replacing Memory Modules Remove the memory module shroud Repeat the process for any remaining memory modules Page Replacing the Memory Card Reader Removing the Memory Card ReaderRemoving the Memory Shroud Memory ShroudLift the memory shroud straight up and out of the system Page Removing the Optical Drive Optical DrivePage Page Removing the Heat Sink and Processor Heat Sink and ProcessorLoosen the four captive screws on the heatsink Page Page Page Removing the Power Supply Power SupplyPage Page Page Removing the System Board System BoardRemove the heat sink and processor Remove any memory modules Page Page Page Remove the system board from the computer chassis Page Removing the Video Card Video CardPage Page Page Removing the Expansion Card Expansion CardPage Page Page Before Working Inside Your Computer Working on Your ComputerTurning Off Your Computer Windows VistaAfter Working Inside Your Computer
Related manuals
Manual 4 pages 991 b Manual 8 pages 63.61 Kb Manual 8 pages 35.51 Kb Manual 4 pages 46.86 Kb