Sennheiser HMD 46, HME 46 manual Specifications HME

Page 17

Specifications

HME 46-3

Headphones

 

Transducer principle

dynamic, open

Ear coupling

supra-aural

Frequency response

20–14,000 Hz

Impedance

300 per system

Characteristic SPL

95 dB SPL at 1 kHz, 1 mW, mono

 

83 dB SPL at 1 kHz, 1 V

THD

< 1 % at 95 dB SPL

 

(350–3,000 Hz)

Contact pressure

approx. 3 N

Microphone

 

Type

MKE 46

Transducer principle

pre-polarized condenser

 

microphone,

 

noise-compensating

Frequency response

Output voltage (HME 46-3, -3-6,

-3PTT-M, -3PTT-6, -3PTT-L)

Output voltage

(HME 46-3PTT-LA, -ATC)

Terminating impedance Supply voltage

General data

100–15,000 Hz

adjustable from 17–100 mV/Pa,

80mV/Pa (factory pre-set)  400 mV at 114 dB SPL

adjustable from 17–215 mV/Pa,

152mV/Pa (factory pre-set)  1520 mV at 114 dB SPL

150–2,200 8–16 V DC

Temperature range

Operation:

–15 °C to 55 °C

 

Storage:

–55 °C to 70 °C

Weight without cable

150 g

 

15

Image 17
Contents HMD Page Safety instructions Improper use Intended use of the headsetHMD 46 / HME FeaturesTurning the microphone boom Delivery includesOperation Positioning the microphone Putting on the headsetFlipping away one earcup Adjusting the volume directly on the audio systemAdjusting the microphone sensitivity Replacing the earpads Care and maintenanceCleaning the headset Accessories and spare parts HMD 46-3PTT-M Product variantsHeadset connector Cable and connector assignmentCable -7 steel wire cable CableCable -PTT-6-1 Cable -LCable -PTT-6 HMD 46-3PTT-M and HME 46-3PTT-M HME 46-3PTT-LHeadphones Specifications HMDSpecifications HME Specifications HMD % at 110 dB SPL Manufacturer Declarations Warranty regulations