Sennheiser HMD 46, HME 46 manual Adjusting the microphone sensitivity

Page 9

Adjusting the microphone sensitivity

The microphone sensitivity has been factory pre-set to 80 mV/Pa as per RTCA DO-214. You can change the microphone sensitivity by turning a small screwdriver in the direction of the arrow.

–

Image 9

Contents HMD Page Safety instructions Improper use Intended use of the headsetHMD 46 / HME FeaturesDelivery includes OperationTurning the microphone boom Positioning the microphone Putting on the headsetFlipping away one earcup Adjusting the volume directly on the audio systemAdjusting the microphone sensitivity Care and maintenance Cleaning the headsetReplacing the earpads Accessories and spare parts HMD 46-3PTT-M Product variantsHeadset connector Cable and connector assignmentCable -7 steel wire cable CableCable -L Cable -PTT-6Cable -PTT-6-1 HMD 46-3PTT-M and HME 46-3PTT-M HME 46-3PTT-LHeadphones Specifications HMDSpecifications HME Specifications HMD % at 110 dB SPL Manufacturer Declarations Warranty regulations