Dell GX270 manual Small Desktop Computer, Small Mini-Tower Computer

Page 6

1metal control-panel shield

2screw

2.Remove the metal control-panel shield.

3.Remove the screw that holds the control panel to the computer, and remove the control panel.

Small Desktop Computer

1.Remove the front I/O panel (see I/O Panel).

2.Using an 8-inch #2 Phillips screwdriver, remove the screw that secures the control panel to the computer, and lift the panel away from the computer.

Small Mini-Tower Computer

1.To remove the top and bottom panels of the computer, remove any installed CD drives and release all the tabs on each panel.

Image 6
Contents June 2004 Rev. A01 Chassis Intrusion Switch Removing the Chassis Intrusion SwitchReplacing the Chassis Intrusion Switch Resetting the Chassis Intrusion DetectorBack to Contents Control Panel Removing the Control PanelSmall Form-Factor Computer Small Desktop Computer Small Mini-Tower ComputerReplacing the Control Panel Small Desktop Computer Small Mini-Tower Computer Opening the Computer Cover Small Form-Factor and Small Desktop ComputersSmall Mini-Tower Computer Closing the Computer Cover Panel Removing the I/O PanelReplacing the I/O Panel Power Supply Removing the Power SupplySmall Desktop Computer Replacing the Power Supply System Board Small Form-Factor System BoardSmall Mini-Tower System Board Jumper Settings Resetting Cmos SettingsRemoving the System Board Replacing the System Board Back to Contents When Using Your Computer When Working Inside Your ComputerGeneral Battery Disposal Protecting Against Electrostatic Discharge