Electrostatic History

narrowed the field of

“contestants down” to the cone and the electrostat.

Rice and Kellogg had

In the late 1800’s, any loudspeaker was considered exotic. Today, most of us take the wonders of sound reproduction for granted.

It was 1880 before Thomas Edison had invented the first phonograph. This was a horn-loaded diaphragm that was excited by a playback stylus. In 1898, Sir Oliver Lodge invented a cone loudspeaker, which he referred to as a “bellowing telephone”, that was very similar to the conventional cone loudspeaker drivers that we know today. However, Lodge had no intention for his device to reproduce music because in 1898 there was no way to amplify an electrical signal! As a result, his speaker had nothing to offer over the acoustical gramophones of the

period. It was not until 1906 that Dr. Lee DeForrest invented the triode vacu- um tube. Before this, an electrical signal could not be amplified. The loudspeak- er, as we know it today, should have ensued then, but it did not. Amazingly, it was almost twenty years before this would occur.

In 1921, the electrically cut phonograph record became a reality. This method of recording was far superior to the mechanically cut record and possessed almost 30 dB of dynamic range. The acoustical gramophone couldn’t begin to reproduce all of the information on this new disc. As a result, further developments in loudspeakers were needed to cope with this amazing new recording medium.

By 1923, Bell Telephone Laboratories made the decision to develop a complete musical playback system consisting of an electronic phonograph and a loudspeaker to take advantage of the new recording medium. Bell Labs assigned the project to two young engineers, C. W. Rice and E. W. Kellogg.

Rice and Kellogg had a well equipped laboratory at their disposal. This lab possessed a vacuum tube amplifier with an unheard of 200 watts, a large selection of the new electrically cut phonograph records and a variety of loudspeaker prototypes that Bell Labs had been collecting over the past decade. Among these were Lodge’s cone, a speaker that used compressed air, a corona discharge (plas- ma) speaker, and an electrostatic speaker.

After a short time, Rice and Kellogg had narrowed the field of “contestants” down to the cone and the electrostat. The out- come would dictate the way that future generations would refer to loudspeakers as being either “conventional” or “exotic”.

Bell Laboratory’s electrostat was something to behold. This enormous bipolar speaker was as big as a door. The dia- phragm, which was beginning to rot, was made of a pig intestine that was covered with fine gold leaf to conduct the audio signal.

When Rice and Kellogg began playing the new electrically cut records through the electrostat, they were stunned and impressed. The electrostat performed splen- didly. They had never heard instrumental timbres reproduced with such realism.

This system sounded like real music rather than the honking, squawking rendition of the acoustic gramophone. Immediately, they knew they were on to something big. The acoustic gramophone was destined to become obsolete .

Due to Rice and Kellogg’s enthusiasm, they devoted a considerable amount of time researching the electrostatic design. However, they soon encountered the same difficul- ties that even present designers face; planar speakers require a very large surface area to reproduce the lower frequen- cies of the audio spectrum. Because the management at Bell Labs considered large speakers unacceptable, Rice and Kellogg’s work on electrostatics would never be put to use for a commercial product. Reluctantly, they advised the Bell management to go with the cone. For the next 30 years, the electrostatic design lay dormant.

During the Great Depression of the 1930’s, consumer audio almost died. The new electrically amplified loudspeaker never gained acceptance, as most people continued to use their old Victrola-style acoustic gramophones. Prior to the end of World War II, consumer audio saw little, if any, progress. However, during the late 1940’s, audio expe- rienced a great rebirth. Suddenly there was tremendous interest in audio products, and with that, a great demand for improved audio components. No sooner had the cone become established than it was challenged by products developed during this new rebirth.

Electrostatic History

Source Speakers specifications

The MartinLogan Source Speakers are a testament to the brand's dedication to high-fidelity sound and innovative design. Renowned for their stunning performance and elegant aesthetics, these speakers cater to audiophiles and casual listeners alike, seamlessly blending into any home audio setup.

At the heart of the Source Speakers is their unique hybrid electrostatic technology. This innovative approach combines the purity of an electrostatic panel with the dynamic bass response of a traditional woofer. The electrostatic panel, known for its ability to recreate sound with exceptional clarity and precision, is complemented by a high-output dynamic woofer. This synergy allows the Source Speakers to deliver a full range of frequencies, from the detailed highs to the robust lows, ensuring an immersive listening experience.

One of their standout features is the Folded Motion tweeter, which utilizes a unique diaphragm that moves in a pleated fashion. This design enables the tweeter to produce greater output and higher efficiency while minimizing distortion. As a result, the Source Speakers are capable of delivering crisp, clear highs that can fill even the largest rooms.

Additionally, the Source Speakers boast a stylish and contemporary design. The elegant cabinetry is crafted from high-quality materials and finished in a range of attractive veneers, allowing them to blend harmoniously with any home decor. The speakers are also relatively compact, making them suitable for a variety of spaces, from dedicated listening rooms to casual home theater setups.

Connectivity is another strong suit of the Source Speakers, with options that include high-quality binding posts for straightforward integration with various amplifiers and audio systems. This versatility ensures that users can easily incorporate these speakers into their existing setups without hassle.

In terms of performance, the Source Speakers excel in creating a soundstage that is both wide and deep. Their ability to produce accurate spatial imaging allows listeners to feel as if they are in the center of the performance. This makes them ideal not only for music lovers but also for movie enthusiasts who crave that cinematic audio experience.

Overall, the MartinLogan Source Speakers represent a perfect amalgamation of cutting-edge technology, stylish design, and outstanding audio performance. Whether for music playback or home theater use, they offer an unparalleled listening experience that will satisfy even the most discerning audiophiles.