3.Remove the WLAN card (see Removing a WLAN Card).
4.Remove the hinge cover (see Removing the Hinge Cover).
5.Remove the keyboard (see Removing the Keyboard).
6.Remove the display assembly (see Removing the Display Assembly).
7.Remove the display bezel (see Removing the Display Bezel).
8.Remove the display inverter (see Removing the Display Inverter).
9.Remove the camera/microphone assembly (see Removing the Camera and Microphone Assembly).
10.Remove the two M2 x
11.Remove the display panel (see Removing the Display Panel).
12.Lift the display panel out of the top cover.
13.Disconnect the display cable from the connector on the back of the display panel.
1display panel 2 display cable connector
3display cable
Replacing the Display Cable
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.
This procedure assumes that you have completed the removal procedure Removing the Display Cable.
1.Connect the display cable to the connector on the back of the display panel.
2.Align the guide pins at the top of the display hinge panels and position the display panel in the top cover.
3.Replace the two M2 x
4.Replace the display inverter (see Replacing the Display Inverter).
5.Replace the display bezel (see Replacing the Display Bezel).
6.Replace the display assembly (see Replacing the Display Assembly).
7.Replace the keyboard (see Replacing the Keyboard).
8.Replace the hinge cover (see Replacing the Hinge Cover).
9.Replace the WLAN card (see Replacing a WLAN Card).