10. Replace the hard drive cover. See Removing the Hard Drive for an illustration of the hard drive cover.
Camera and Microphone Assembly
Removing the Camera and Microphone Assembly
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1.Follow the instructions in Before Working on Your Computer.
2.Remove the hard drive cover. See Removing the Hard Drive for an illustration of the hard drive cover.
3.Remove the WLAN card (see Removing a WLAN Card).
4.Remove the hinge cover (see Removing the Hinge Cover).
5.Remove the keyboard (see Removing the Keyboard).
6.Remove the display assembly (see Removing the Display Assembly).
7.Remove the display bezel (see Removing the Display Bezel).
8.Remove the M2 x
9.Lift the camera/microphone out of the top cover and disconnect the camera/microphone cable.
1 M2 x
Replacing the Camera and Microphone Assembly
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.
This procedure assumes that you have completed the removal procedure Removing the Camera and Microphone Assembly.
1.Connect the camera/microphone cable to the connector on the camera/microphone assembly.
2.Position the camera/microphone in the top cover and replace the M2 x 3- mm screw that secures the camera/microphone assembly to the top cover.
3.Replace the display bezel (see Replacing the Display Bezel).
4.Replace the display assembly (see Replacing the Display Assembly).