1
2
3
1 | bezel | 2 power-supply unit |
3 | screws (4) | |
Replacing the Power-Supply Unit
1Align the screw holes on the power-supply unit with the screw holes on the bezel.
2Replace the screws that secure the power-supply unit to the bezel.
3Slide the power-supply unit into the chassis through the back of the computer.
4Tighten the captive screws that secure the power-supply unit to the back of the chassis.
5Connect the DC-wire harness to the power-supply unit.
6Align the notch on the power-supply cover with the tab on the chassis.
7Slide the power-supply cover towards the tabs until it locks in place.
