6
Media-Card Reader
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 13. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
Prerequisites
1Remove the left
Removing the Media-Card Reader
1Press the AlienHead on the front of your computer to lower the drive panel.
2Open the PCI shroud. See "Opening the PCI Shroud" on page 45.
3Disconnect the FlexBay USB cable from the FLEXBAY connector on the master I/O board. For more information on the location of the connector, see "Master I/O Board Components" on page 21.
4Lift and hold the securing tab and then push the FlexBay dock to slide it out through the front of the computer.
41
