Alienware D01M owner manual Postrequisites, Installing Dual Graphic Cards

4Connect the power cables to the graphics card.

Postrequisites

1Close the PCI shroud. See "Closing the PCI Shroud" on page 46.

2Replace the left side-panel. See "Replacing the Left Side-Panel" on page 27.

3Follow the steps in "After Working Inside Your Computer" on page 15.

Installing Dual Graphic Cards

1Locate the second PCI-Express x16 connector on the system board. See "System-Board Components" on page 20.

2Align the second graphics card with the second PCI-Express x16 card connector on the system board.

3Place the card in the connector and press down firmly. Ensure that the card is firmly seated in the slot.

4Replace the screws that secure the second graphics card to the chassis.

5Connect the dual graphics bridge connecting the two graphics card.

6Connect the two power cables to the graphics card.

Graphics Card

59