Alienware D01M owner manual Removing the Right Lighting-Board, 117

24

Right Lighting-Board

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 13. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.

Prerequisites

1Remove the left side-panel. See "Removing the Left Side-Panel" on page 25.

2Open the PCI shroud. See "Opening the PCI Shroud" on page 45.

3Remove the drive-bay shroud. See "Removing the Drive-Bay Shroud" on page 47.

4Remove the right-side top panel. See "Removing the Right Lighting- Board" on page 117.

Removing the Right Lighting-Board

1Disconnect the right lighting-board cable from the SIDE_R connector on the master I/O board.

2Note the right lighting-board cable routing and remove it from the slot on the computer.

3Remove the screws that secure the right lighting-board to the right-side middle panel.

4Lift the right lighting-board along with its cable away from the right-side middle panel.

Right Lighting-Board

117