Alienware D01M owner manual WiFi/Bluetooth Assembly, Removing the WiFi/Bluetooth Card, 137

29

WiFi/Bluetooth Assembly

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 13. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.

Prerequisites

1Remove the left side-panel. See "Removing the Left Side-Panel" on page 25.

2Open the PCI shroud. See "Opening the PCI Shroud" on page 45.

3Remove the drive-bay shroud. See "Removing the Drive-Bay Shroud" on page 47.

Removing the WiFi/Bluetooth Card

1Disconnect the WiFi/Bluetooth assembly cable from the connector on the master I/O board.

2Loosen the thumbscrew that secures the WiFi/Bluetooth assembly to the chassis.

3Slide and pull the WiFi/Bluetooth assembly away from the chassis.

WiFi/Bluetooth Assembly

137