
4Route and connect the cables that you disconnected from the system- board assembly.
NOTE: For information on system board connectors, see
Postrequisites
1Replace the processor. See "Replacing the Processor" on page 78.
2Replace the processor
3Replace the memory module(s). See "Replacing Memory Module(s)" on page 64.
4Replace the
5Replace the
6Replace the graphics card. See "Replacing the Graphics Card" on page 58.
7Close the PCI shroud. See "Closing the PCI Shroud" on page 46.
8Replace the memory fan. See "Replacing the Memory Fan" on page 68.
9Replace the left
10Follow the steps in "After Working Inside Your Computer" on page 15.
Entering the Service Tag in BIOS
1Turn on the computer.
2Press <F2> during POST to enter the system setup program.
3Navigate to the main tab and enter the service tag in the Service Tag Setting field.
97