IMPORTANT POINTS TO REMEMBER WHEN OPERATING
•Before the DOUBLE BURNER is used for the first time, it should be heated up at maximum setting for approximately 4 minutes without a pot. During this curing process, the protective coating is hardened and obtains its maximum strength.
•The DOUBLE BURNER may smoke the first time it is used – it is not defective and the smoke will burn off within a few minutes.
•Do not leave the unit ON without any pots/pans on the Solid Burners after the curing process.
•Do not use as a portable heater.
•Make sure the power supply cord does not touch hot elements or cooking utensils.
•For daily cooking, wipe excess water/condensation off pots, lids and utensils prior to use.
•Make sure that hot pots/pans do not touch the Housing Unit – these could damage the surface finish.
CLEANING INSTRUCTIONS
Reasonable care will ensure many years of service from your unit. Avoid dropping items on the Burner Rings and Solid Burners.
1.Turn Temperature Control Dial(s) OFF.
2.Always unplug unit from electrical outlet and allow to cool before cleaning.
3.NEVER IMMERSE UNIT IN WATER OR OTHER LIQUIDS.
4.For easy cleaning, the Burners are sealed. Do not attempt to separate Burners from the unit.
5.Use a damp, soapy cloth or sponge to clean the surface of the Solid Burners, Burner Rings,
6.Thoroughly wipe soap from Solid Burners and Burner Rings.
7.There are no user serviceable parts. Any servicing other than cleaning should be performed by an authorized service center.
SERVICE INSTRUCTIONS
1.Do NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void the Warranty.
2.If you have any questions or comments regarding this unit’s operation or believe any repair is necessary, please visit our website at www.oster.com or call
