Alienware D01M owner manual Replacing the Hard-Drive Fan Assembly

1

2

1 hard-drive fan cable 2 hard-drive fan assembly

Replacing the Hard-Drive Fan Assembly

1Slide the hard-drive fan assembly into the hard-drive fan assembly bay.

2Route the cable through the slot in the hard-drive bay and then connect the hard-drive fan assembly cable to the FAN_HDD connector on the master I/O board.

3Replace the drive-bay shroud. See "Replacing the Drive-Bay Shroud" on page 48.

4Close the PCI shroud. See "Closing the PCI Shroud" on page 46.

34

Hard-Drive Fan Assembly