124
ReplacingthePaperRoll
■Recordingpaperspecications
Be sure to use paper rolls specied by SHARP.
The use of any other paper rolls than specied could cause paper jamming, resulting in register malfunction.
Paperspecication
Paper width: 57.5 ± 0.5 mm
Max. outside diameter: 80 mm
Quality: High quality(0.06 to 0.08 mm thickness)
•Besuretosetapaperrollpriortousingyourmachine,otherwiseitmaycauseamalfunction.
Install the paper roll in the printer. Be careful then to set the roll and cut the paper end correctly.
To the printer
Incorrect
To the printer
Correct Correct Incorrect
(How to set the paper roll) (How to cut the paper end)
■InstallingthePaperRoll
Always install the paper roll even when you set the register for not printing receipt in REG mode.
1. Remove the printer cover.
2. Lift up the print roller arm.
3. Set the paper correctly in the paper roll cradle.
NOTE Before placing a new paper roll in the paper
roll cradle, cut off the pasted (taped) part of the
paper and conrm that the cut end of the paper is
straight.
Print roller arm