Sharp XE-A207W/XE-A207B Euro Migration Function, Euro status, Items Type B Type C Type D

cEURO Migration Function

Basically your register can be automatically modified to correspond to the introduction of EURO by executing the operation “EURO STATUS” in X2/Z2 mode. However, there are several options you must set depending on your need. Carefully conduct necessary settings.

EURO status:

You can select status from following 4 types ((A), (B), (C), or (D)). And the selectable type is decided as follows for each status. Type (A) is the base status (initial status).

From type (A)————— selectable Type (B), (C), or (D)

From type (B)————— selectable Type (C), (D)

From type (C)————— selectable Type (D)

	Items	Type (B)	Type (C)	Type (D)
1	General Z1 report	ISSUE	ISSUE	ISSUE
2	General Z2 report	ISSUE	ISSUE	ISSUE
3	GT1/2/3 & Training GT	—	CLEAR	CLAER
4	Convert the unit price of DEPT/PLU*	—	CONVERTING	CONVERTING
5	EX1 AMOUNT PRINTING FOR	YES	YES	NO
	TOTAL AND CHANGE
6	EX1 CALCULATTION METHOD	DIVISION	MULTI.	MULTI.
			The current
7	EX1 currency symbol	[EURO]	domestic	—
			currency symbol
8	EX1 TAB	2	The current	—
			domestic TAB
9	Domestic currency symbol	—	[EURO]	[EURO]
10	Domestic TAB	—	2	2
11	Rounding SYSTEM (Denmark/	—	Normal	Normal
	Sweden/Normal)
12	Rounding up/down of the unit digits	—	No	No
	of AMOUNT
13	Lowest digit entering limitation of	—	Arbitrary	Arbitrary
	item
14	Lowest digit entering limitation of	—	Arbitrary	Arbitrary
	payment
15	Difference memory	—	No	No
16	Rounding of foreign currency for EX1	ROUND OFF	ROUND OFF	ROUND OFF
		(4DOWN-5UP)	(4DOWN-5UP)	(4DOWN-5UP)

The marked items “—” is remaining the current data.

*: The preset rate of the Exchange1 is applied as the conversion rate, and the calculation method is set to “division”. When the conversion has been made, the message “PRICE CONVERTED” is printed on the report.

119