■■ Function Selection
Your register enables you to select various functional selections.
Procedure
The screen continues.
Program each item as follows:
•LV.SFT MODE (Use the selective entry) for
LIMITED: Allowed only in the Manager mode.
PUBLIC: Allowed in the REG mode and the Manager mode.
•LV.SFT TYPE (Use the selective entry) for
AUTO: Automatic return mode
MANUAL: Lock shift mode
•RETURN TO L1 (Use the selective entry) for
When the PLU level shift system is set to “AUTO,” the PLU level can be returned to level 1 by one of the following methods:
BY ITEM: Returns the PLU level to level 1 by one item.
RECEIPT: Returns the PLU level to level 1 by one receipt.
•GLU# ENTRY (Use the selective entry) for
A217B only
AUTO: Assign GLU code in an automatic serial number
MANUAL: Require manual GUL code entry
•GLU CLK CHECK (Use the selective entry) for
YES: Enable to check of the clerk
NO: No checking
•SPLIT COUNT (Use the selective entry)
Count method of split pricing entry.
PACKAGE: Unit of the package
QUANTITY: Quantity
• CR IN RA/PO (Use the selective entry)
Credit totalizer update if RA or PO finalization by the credit key.
NON: Not update
UPDATE: Update
•VD MODE TO HOURLY (Use the selective entry) YES: Enable to add to the hourly total in void mode. NO: Disable to add to the hourly total in void mode.
•ST BEFORE DIRECT (Use the selective entry) Subtotal entry before direct
NOT: Not to require entry of subtotal for the
MUST: Require entry of subtotal for the
•ST BEFORE TEND (Use the selective entry)
Subtotal entry before tender
NOT: Not to require entry of subtotal for the tendering finalization
MUST: Require entry of subtotal for the tendering finalization
•NS RECEIPT (Use the selective entry) Printing the receipt at the time of No Sale PRINT: Print the receipt
NOT: Not to print the receipt
92
