95
■EUROChange
You can program optional functions for EURO change. For the details, refer to EURO Migration Function
section.
Procedure Program each item as follows:
•DATE(Usethenumericentry)
Preset the date to execute the automatic EURO modication
operation.
Enter the day (2 digits), month (2 digits), and year (2 digits) in
this sequence.
•TIME(Usethenumericentry)
Preset the time of the date to execute the automatic EURO
modication operation.
Enter the hour (00-23)
•PRICECONVERT(Usetheselectiveentry)
YES: Converts the preset unit prices of Dept./PLU in the automatic EURO modication operation.
NO: Does not convert the preset unit prices of Dept./PLU to the ones of EURO currency in the
automatic EURO modication operation.
NOTE The preset rate of the Exchange 1 is applied as the conversion rate, and the calculation method
is set to “division”.
•EUROJOB(Usetheselectiveentry)
NON-COMPUL.: Non-compulsory the automatic EURO modication operation in the X2/Z2 mode after
the preset date.
COMPULSORY: Compulsory the automatic EURO modication operation in the X2/Z2 mode after the
preset date.
NOTE When the EURO STATUS of your register is already “D” (i.e. the domestic currency has been
changed to EURO in your register), this programming is disabled.