129
InstallingtheFixingAngleBracket
To prevent the register from moving when the drawer opens, the xing angle bracket is supplied with the
register. By attaching the bracket to the table where the register is installed, you can hock the register on
this bracket and secure the register to its position.
Howtoinstallthexinganglebracket
1. Thoroughly clean the location where the xing angle
bracket (B) is to be placed.
2. Peel off the adhesive tape on the xing angle bracket.
3. Hook the angle bracket onto the hook (A) that is located at
the bottom rear of the register.
4. Firmly stick the xing angle bracket to the table surface
that your cleaned above.
Howtoremovetheregisterfromthexinganglebracket
1. Lift up the front of the register and pull the register towards
you.