Thermo Products PHCFA072DV4R F. Limit Position And Location, G. Burner Installation, Fig-7

F. LIMIT POSITION AND LOCATION:

WARNING: The predetermined limit locations on all of the Thermo Pride oil fired furnaces have been tested and approved by Thermo Products, LLC. Any attempt to relocate these safety controls or replace these safety controls with a control that is not approved, or is incompatible, may result in personal injury, substantial property damage or death.

G. BURNER INSTALLATION:

NOTICE: This furnace comes with a Riello BF3 burner preinstalled from the factory. If there is a need to remove the burner prior to installation or during service, the following explains how the burner is inserted and mounted.

The oil burner is mounted on three stud mounting bolts on the mounting plate covering the opening in the front of the heat exchanger. This unit is designed with a pre-positioned chamber. There is no insertion adjustment necessary. The unit requires only the mounting of the burner. Insertion is pre-determined. The top panel is removable by taking out the four screws for easy access to the burner and the piping. Replace this panel prior to operating the furnace.

Fig-7

H. BURNER SPECIFICATIONS AND APPLICATIONS:

The BF3 Riello flame retention oil burner is the only oil burner that can be used on the OHC.

	THERMO		RIELLO	MAXIMUM	SHIPPED	OIL
	PRIDE’S	AMULETTE	BURNER	NOZZLE	NOZZLE SIZE	PUMP
FURNACE MODEL	BURNER		MODEL &	SIZE**		PRESSURE
	SPEC NO.		TUBE			(PSIG)
			LENGTH
OHCFA072DV4R	C8511373	380789	BF3-4.5”	0.50X60° H	0.50X60° H	145

Table 3: Riello burner specifications

14