BT VP1000 manual General Information, Product Information, Specifications, Control Panel

BT Home Monitor ~ Issue 5 ~ 1st Edition ~ 26_01_ 04 ~ 5725

Section 8 – General Information

SECTION 8

Product Information

Wireless systems are reliable and tested to high standards. However, due to their transmitting power and range, there are some limitations to be considered:

•Receivers may be blocked by radio signals occurring on or near operating frequencies, regardless of the code selected.

•A receiver can only respond to one transmitted signal at a time.

•Wireless equipment should be tested regularly to determine whether there are sources of interference and to protect against faults.

Specifications

CONTROL PANEL

Sensor
Numbers:	28 fully supervised wireless
User Codes:	8 codes, 4 digits each
Control
Facilities:	Integral keypad
	PowerCode / Code-Secure(tm)
	hand-held transmitters
	Wireless Keypad
Display:	Single line, backlit 16-character
	LCD and 4 LED indicators
Setting Modes: ON, HOME, Sensor Off
Sensor	Home, House & Home,
Responses:	Walk-Thru, Entry 1, Entry 2,
	Help Silent, Fire, Emergency,
	Alarm and Non Alarm
Siren Signals:	Continuous (intrusion / 24 hours /
	panic); triple pulse - pause - triple
	pulse... (fire)
Siren Timeout:	Programmable
	(4 minutes by default)
Internal
Siren Output:	At least 85 dBA at 3m (10ft)
Supervision:	4-hour reporting time-window
Data Retrieval:	Status, alarm in memory, check
Compliance	EMC Emission:
with European	EN 50081-1 1992

Standards:	RFI: EN55022 1998
	EMC Immunity: EN 50082-1 1997
	EMC Immunity to Conducted
	RF: EN6100-4-6 1996
	Telephony: TBR21 1998
	Safety: EN060950 2000
Operating
Frequencies:	868.95MHz
Receiver Type:	Super-heterodyne, fixed frequency
Coding:	PowerCode and / or CodeSecure(tm)
Output Power:	Maximum 10mW
Power Supply:	Plug-in transformer 230VAC,
	50Hz /9VAC, 700mA
Current Drain:	Approx. 95mA standby, 500 mA
	at full load and in alarm
Internal Siren
Current (INT):	550* mA max.
High Current /
Short Circuit	All outputs are protected
Protection:	(current limited)
Total Home
Monitor Output
Current:	600mA max.

Internal Siren

Output Current: 50mA max.

Backup Battery: (Provides power for at least 8 hours). Six 1.2V NiMH rechargeable AA Cells, 1300mAh. Or six 1.2V NiCad AA Cells, 650mAh

Battery Test: Once every 24 hours, and once per hour during AC power loss

Built-in Modem: 300 baud, Bell 203 protocol

Data Transfer to

Local Computer: Via RS232 serial port

Reporting

Format Options: SIA

Operating

Temp. Range: 0°C to 49°C (32°F to 120°F)

Storage

Temp. Range: –20°C to 60°C (–4°F to 140°F)

Humidity: 85% relative humidity at 30°C (86°F)

64