BT VP1000 manual Tips On Effective Positioning

Models: VP1000

1 76
Download 76 pages 3.4 Kb
Page 10
Image 10

BT Home Monitor ~ Issue 5 ~ 1st Edition ~ 26_01_ 04 ~ 5725

To install the Movement Detector, follow these instructions:

ACTIVATING THE BATTERY

Fig 8.

Lens

Loosen screw and pull the two halves apart

Remove front cover using a screwdriver. Fig 8.

Remove the red tag from the battery.

Check that the LED flashes.

Replace the cover and tighten the screw.

LOCATING

Take some time to determine where you want to position the detectors in your home, for maximum effect. Ideally, detectors should be placed in the most vulnerable rooms, or thoroughfares from key entry points.

If a Movement Detector is in the line of sight of the Control Panel, program the sensor as WALK- THRU ensuring it ignores movement when you are entering and exiting your home. If you wish to use the ON HOME setting, which allows you to switch on the sensors protecting the perimeter of your home when you are in, you will need to program the sensor as HOME. Please refer to Section 5 for more information.

Tips On Effective Positioning:

Place the Movement Detector on a solid and stable surface between 1.8m to 2.4m (6ft to 8ft) from the ground.

Do not point at heat sources such as radiators or open fires.

Place away from direct sunlight.

Do not install outdoors.

Avoid positioning in draughts.

Do not install behind partitions.

You have a choice of whether to fit the Movement Detector using the screws or adhesive provided.

The detectors can be mounted on a flat wall or in a corner.

MOUNTING USING ADHESIVE

If you wish to fix the Movement Detector in place using adhesive tape, decide where you want the detector to be positioned, and ensure the mounting surface is clean. Fig 9.

Position of adhesive for flat wall mounting

Fig 9.

SECTION 2

Position of adhesive for corner mounting

The adhesive is double sided and has two layers of protective covering in place. Peel back one layer of the protective film and attach the adhesive to the back of the Movement Detector.

Peel back the remaining layer of protective film and hold the detector firmly in place against the mounting surface until firmly attached.

After fixing the detector in place with the adhesive, the strength of the bond will increase as time passes. 50% of strength will be achieved after leaving for 20 minutes and 100% of strength will be achieved after 72 hours.

9

Page 10
Image 10
BT VP1000 manual Tips On Effective Positioning

VP1000 specifications

The BT VP1000 is a state-of-the-art video conferencing system designed to enhance communication and collaboration in business settings. This device stands out due to its remarkable features, technologies, and characteristics, making it an excellent choice for organizations seeking robust and efficient video conferencing solutions.

One of the most notable features of the BT VP1000 is its high-definition video quality, which is supported by advanced codecs that optimize bandwidth usage without compromising on clarity. Users can expect crisp visuals, allowing for clearer communication during meetings, whether they are in the same room or remote locations. The device supports resolutions up to 1080p, ensuring that participants can see and engage with each other effectively.

Audio quality is equally impressive with the BT VP1000. It incorporates advanced noise reduction technologies and high-fidelity speakers, providing clear and natural sound. The array microphones help capture voices from all corners of the room, ensuring that everyone can contribute to the conversation, thus enriching the collaborative experience.

The BT VP1000 also boasts an intuitive user interface, making it easy for users of all skill levels to navigate its features. With one-touch meeting initiation, participants can quickly join video calls without the hassle of complicated setups. The system is compatible with various platforms, ensuring seamless integration with existing IT infrastructures.

Moreover, the BT VP1000 supports multiple connectivity options, including HDMI and USB, facilitating easy connection to laptops and other devices. This versatility allows users to share presentations and documents effortlessly, promoting more productive meetings.

Security is a top priority for businesses, and the BT VP1000 is equipped with robust encryption and data protection protocols. This ensures that sensitive information shared during video calls remains secure from potential cyber threats.

In terms of design, the BT VP1000 is sleek and modern, making it an attractive addition to any conference room. It is engineered for durability as well, ensuring long-lasting performance.

In summary, the BT VP1000 is an exemplary video conferencing device that harmonizes visual clarity, superior audio quality, user-friendly features, and seamless connectivity. Its focus on security also makes it a reliable choice for businesses looking to enhance their communication capabilities. By adopting the BT VP1000, organizations can expect to elevate their collaboration efforts significantly while fostering an efficient work environment.