BT Home Monitor ~ Issue 5 ~ 1st Edition ~ 26_01_ 04 ~ 5725

SIREN ON TIME

When your BT Home Monitor VP1000 triggers in response to unwanted activity, the internal siren will sound immediately (unless the detector is on an entry delay). You can choose how long you would like the internal siren to sound for. Choices are in minutes: 1 minute, 3m, 4m (default), 8m, 10m, 15m, 20m.

BUILT IN SIREN

You can choose to turn your internal siren off using this option. This is particularly useful for when you are testing the system, as the siren is very loud.

If you do turn your internal siren off for testing, remember to turn it back on once you have finished.

CHECK – BEEPS

When your BT Home Monitor VP1000 responds to an event, or detects a problem which needs attention, the CHECK indicator on the front panel will light, it will emit audible beeps at regular intervals (three per minute) and show a message on the display. You can choose whether to have the beeps enabled or not. Choices are: disable beeps, enable beeps (default).

To remove any CHECK indications, you must interrogate the panel memory for alerts or faults and attend to them. If you cannot eliminate the problem immediately, and you wish to temporarily suspend the beeps, press the button on your Keyfob or the OFF button followed by your USER PIN on the Control Panel or Keypad. This will silence the beeps for four hours.

For assistance in resolving problems, and eliminating CHECK indications, please refer to the troubleshooting section.

Communications Settings

This menu option allows you to change operational settings for your system including:

1st Telephone Number

Property ID Number

2nd Telephone Number

Two Way Voice

Send ON / OFF

1ST TELEPHONE NUMBER

This is the number your system will call to contact the BT Home Monitoring centre. This is pre-programmed and should not be changed. Note that the telephone number has an 0870 prefix, meaning your system will not be able to dial the monitoring service if you use national rate call barring on your telephone line.

PROPERTY ID NUMBER

This is the number which was provided to you at the end of your account set up process.

It is known as your PROPERTY ID NUMBER, which identifies your property to the BT Home Monitoring centre. Once input – it should not be changed.

2ND TELEPHONE NUMBER

This is the back-up number your system will call to the BT Home Monitoring centre. This is pre-programmed and should not be changed.

TWO WAY VOICE

Choices are: Enable two-way Disable two-way (default)

This function allows you to listen or speak in to the monitored property through the control panel.

SEND ON / OFF

ONLY AVAILABLE IF YOU HAVE ACCESS TO THE INTERNET

This option allows your BT Home Monitor VP1000 to send a message to the BT Home Monitoring service every time it is switched on and off. This is a useful feature, as you can view the status of your system remotely from your personal online account, to tell if your alarm is switched on or off. You can use this feature to tell if you or another member of your household remembered to switch on the system before leaving home. Note this will result in outgoing calls from your property so the default is off.*

Choices are: Send NO On / Off (default), Send On/ Off.

*Note that call charges will apply each time your system makes an outgoing call.

SECTION 4

35

Page 36
Image 36
BT VP1000 manual Communications Settings

VP1000 specifications

The BT VP1000 is a state-of-the-art video conferencing system designed to enhance communication and collaboration in business settings. This device stands out due to its remarkable features, technologies, and characteristics, making it an excellent choice for organizations seeking robust and efficient video conferencing solutions.

One of the most notable features of the BT VP1000 is its high-definition video quality, which is supported by advanced codecs that optimize bandwidth usage without compromising on clarity. Users can expect crisp visuals, allowing for clearer communication during meetings, whether they are in the same room or remote locations. The device supports resolutions up to 1080p, ensuring that participants can see and engage with each other effectively.

Audio quality is equally impressive with the BT VP1000. It incorporates advanced noise reduction technologies and high-fidelity speakers, providing clear and natural sound. The array microphones help capture voices from all corners of the room, ensuring that everyone can contribute to the conversation, thus enriching the collaborative experience.

The BT VP1000 also boasts an intuitive user interface, making it easy for users of all skill levels to navigate its features. With one-touch meeting initiation, participants can quickly join video calls without the hassle of complicated setups. The system is compatible with various platforms, ensuring seamless integration with existing IT infrastructures.

Moreover, the BT VP1000 supports multiple connectivity options, including HDMI and USB, facilitating easy connection to laptops and other devices. This versatility allows users to share presentations and documents effortlessly, promoting more productive meetings.

Security is a top priority for businesses, and the BT VP1000 is equipped with robust encryption and data protection protocols. This ensures that sensitive information shared during video calls remains secure from potential cyber threats.

In terms of design, the BT VP1000 is sleek and modern, making it an attractive addition to any conference room. It is engineered for durability as well, ensuring long-lasting performance.

In summary, the BT VP1000 is an exemplary video conferencing device that harmonizes visual clarity, superior audio quality, user-friendly features, and seamless connectivity. Its focus on security also makes it a reliable choice for businesses looking to enhance their communication capabilities. By adopting the BT VP1000, organizations can expect to elevate their collaboration efforts significantly while fostering an efficient work environment.